Model	CF-PGE208N
Port Characteristics	Downlink port	8 10/100/1000Base-TX Ethernet ports (PoE)
	Upstream port	2 10/100/1000Base-TX Ethernet ports
PoE Features	PoE standard	Standard mandatory DC24V power supply
	PoE power supply mode	Mid-End Jumper: 4/5 (+), 7/8 (-)
	PoE output power	Single port PoE output ≤ 30W (24V DC); Whole PoE output power ≤ 120W
Exchange performance	web standard	IEEE802.3; IEEE802.3u; IEEE802.3x
	exchange capacity	6Gbps
	packet forwarding rate	14.88Mpps
	Exchange method	Store and forward (full wire speed)
Protection level	Lightning protection	4KV executive standard: IEC61000-4
	Static Protection	Contact discharge 6KV; air discharge 8KV; executive standard: IEC61000-4-2
DIP switch	OFF	1-8 port rate is 1000Mbps, transmission distance is 100 meters.
	ON	The 1-8 port rate is 100Mbps, and the transmission distance is 250 meters.
Power Specifications	Input voltage	AC 110-260V 50-60Hz
	Output Power	DC 24V 5A
	Machine power consumption	Standby power consumption: <5W; full load power consumption: <120W
LED indicator	PWRER	Power Indicator
	Extend	DIP switch indicator
	network indicator	10*Link/Act-Green
	PoE indicator	8*PoE-Red
Environmental characteristics	Operating temperature	-20℃ ~ +60℃
	storage temperature	-30℃ ~ +75℃
	Working humidity	5%-95% (no condensation)
external structure	Product Size	(L×D×H): 143mm×115mm×40mm
	Installation method	Desktop, wall-mounted installation
	weight	Net weight: 700g; Gross weight: 950g

product description: This switch is a 10-port Gigabit unmanaged PoE switch, which is specially designed for security monitoring systems such as millions of high-definition network monitoring and network engineering. It can provide seamless data connection for 10/100/1000Mbps Ethernet, and also has PoE power supply function, which can supply power to powered devices such as network surveillance cameras and wireless (AP). 8 10/100/1000Mbps downlink electrical ports, 2 10/100/1000Mbps uplink electrical ports, of which 1-8 Gigabit downlink ports all support 802.3af/at standard PoE power supply, the maximum output of a single port is 30W, and the maximum output of the whole machine is 30W. PoE output 65W, dual Gigabit uplink port design, can meet the local NVR storage and aggregation switch or external network equipment connection. The switch's unique system mode selection switch design allows the user to select the preset working mode according to the actual situation of the network application, so as to adapt to the changing network environment. It is very suitable for hotels, campuses, factory dormitories and small and medium-sized enterprises to form cost-effective networks.A brief introduction to poe switches poe (PowerOverEthernet) refers to the place where there is no change to the existing Ethernet Cat.5 cabling infrastructure, when data signal transmission is performed on some IP-based terminals (such as IP phones, WLAN access points, network cameras, etc.). , can also provide DC power to such equipment. The poe technology can ensure the normal operation of the existing network, at the same time guarantee the security of the existing structured line, and reduce the cost to a minimum. The poe switch port supports 15.4/30W output and complies with the IEEE802.3af/at standard. It supplies power to standard poe terminal equipment and supplies power through the network cable, eliminating the need for additional power wiring. After investigation and research, the poe switch researched and developed by Zhaoyue complies with the IEEE802.3at and IEEE802.3af standards, and its port output power can reach 25-30W. To put it simply, a poe switch is a switch that supports network cable power supply. It can not only realize the data transmission function of ordinary switches, but also supply power to network terminals.