Get high-speed connectivity with our 5.8G 900M wireless bridge

◎ product description The CF-CPE900K is a high-performance enterprise-class outdoor network bridge product that supports 5G full-frequency band and uses 802.11A/N/AN/AC technology. Unique digital tube matching technology, no computer configuration, easily complete point to point, point to-point (within 8 points) equipment matching. Gigabit network interface, 5G 802.11AN MIMO technology wireless processing speed up to 900Mbps. Flexible power supply mode, support 24V POE network cable power supply and 12V 1A DC local power supply, the network cable power supply distance can reach 80 meters (related to the network cable material). Using outdoor IP65 windproof, rainy, dustproof, sunscreen protection grade shell design, easy to adapt to a variety of harsh outdoor environment. Built-in 14dBi double intensified plate antenna, easy and quick to install. With high performance, high gain, high reception sensitivity, high bandwidth and other characteristics, greatly enhance the wireless transmission performance and stability, widely used in medium and short distance video transmission and data transmission.◎ product technical indicators

The main chip

MTK7620DA + 7612E Package 64M RAM

Flash Memory

8MB Flash

size

260*90*37mm

antenna

5.8G（802.11a/n/an/ac）2T2R

antenna gain

Built-in bipolarization high-gain 14dBi directional plate-shaped antenna

speed

5.8g 900Mbps

port

110 / 100 / 1000Mbps RJ45 port, 110 / 100Mbps RJ45 interface

source

Support DC 12V 1A, POE 24V 1A non-standard power supply

push-button

1 * Digital switch, short press the digital tube display value plus one 1 * Reset button, and press it for 5 seconds to restore the factory settings 1 * Dial code switch, left and right switch main and slave mode

transmission distance

2KM

Work frequency band

802.11a/n/an/ac: 5.1GHz~5.8GHz (China)

transmitting power

11a
r6_24,r36,r48,	23
r54	20
11AC VHT20
MCS0, MCS1_2, MCS3_4, MCS5, MCS6	23
MCS7	23

MCS8	20
MCS9	20
11AC VHT40
MCS0, MCS1_2, MCS3_4, MCS5, MCS6	23
MCS7	20
MCS8	20
MCS9	20
11AC VHT80
MCS0, MCS1_2, MCS3_4, MCS5, MCS6	23
MCS7	20
MCS8	20
MCS9	20

EVM

11n

MCS		Requirements are less than (dB)
Modulation	Coding rate	Requirements are less than (dB)
BPSK	1/2	-5
QPSK	1/2	-10
QPSK	3/4	-13
16QAM	1/2	-16
16QAM	3/4	-19
64QAM	2/3	-22
64QAM	3/4	-25
64QAM	5/6	-28

11ac

MCS		Requirements are less than (dB)
Modulation	Coding rate	Requirements are less than (dB)
BPSK	1/2	-5
QPSK	1/2	-10
QPSK	3/4	-13
16QAM	1/2	-16
16QAM	3/4	-19
64QAM	2/3	-22
64QAM	3/4	-25
64QAM	5/6	-27
256QAM	3/4	-30
256QAM	5/6	-32

EVM

5GHz	Symbol	Parameter		Rx(dBm)
802.11a	Srf (OFDM)	1Rx chain	6Mbps	-88
802.11a	Srf (OFDM)	1Rx chain	54Mbps	-72
802.11ac	802.11ac VHT20	1 Stream(1x1)	MCS0	-84
			MCS7	-67.5
			MCS8	-64
		2 Stream(2x2)	MCS0	-83
			MCS7	-66.5
			MCS8	-63
	802.11ac VHT40	1 Stream(1x1)	MCS0	-82
			MCS7	-65.5
			MCS9	-58.5
		2 Stream(2x2)	MCS0	-81
			MCS7	-64.5
			MCS9	-57.5
	802.11ac VHT80	1 Stream(1x1)	MCS0	-79
			MCS7	-62
			MCS9	-55.5
		2 Stream(2x2)	MCS0	-78
			MCS7	-61
			MCS9	-54.5

Support rate

802.11ac: 6.5Mbps-867Mbps 802.11n: 6.5Mbps and 300Mbps

Operating / storage temperature

-Temperature: -30℃ ~ + 55℃ (working), -40℃ ~ + 70℃ (stored) Humidity (non-condensation): 10%~90% (working), 5%~95% (storage)

◎ Product hardware The 900Mbps high-speed rates and NAT high-conversion rates CF-CPE900K uses 802.11A/N/AN/AC technology to provide a wireless access speed of up to 900Mbps, which is about 3 times that of 802.11/b/g/n products in the same environment, and the conversion rate of NAT is> 93%, realizing a faster download and upload speed through the external network, and online surfing at will. Transparent, highly efficient and energy-efficient The product supports IEEE802.3az, which can enter the low-power mode in a transceiver without a sending frame. When a new frame arrives, the transceiver will return to the active mode in several microseconds, thus achieving an almost transparent energy saving to the upper layer of the protocol. The energy consumption can be automatically adjusted according to the actual flow of the port, which can be quickly converted between full-speed operation and low-power idle mode, saving 30% of the power consumption for users, and greatly saving the operating cost. Beam forming technology Through the wave speed forming technology, can automatically adjust the size of the signal weighted value of each array in the array, the antenna direction of zero alignment interference direction and suppress the interference, enhance the system useful signal detection ability, optimize antenna direction, and can effectively track the useful signal, suppress and eliminate interference and noise, even in the close distribution of multiple interference and the same frequency, can successfully suppress the interference. The pairing is simple and efficient Without network expertise, no computer operation, the point-to-point, point-to-point, point-to-point (up to the same value. Support for 5G full frequency band Supported channels are 36,40,44,48,52,56,60,64,149,153,157,161,182,186,190,194 special channels are not on by default and can be turned on when needed.

classification of waterproof	IP65
Signal indicator, 4	Bridge access point: the output power indicator lamp Below 25% (SIG1 often bright), 25%~50% (SIG1-SIG2 often bright), 50%~75% (SIG1-SIG3 often bright), 75%~100% (SIG1-SIG4 bright). Bridge client: connect the signal strength indicator light When the connection fails, when the connection is successful: 0~ -65dBm (SIG1-SIG4 often bright), -66- -75dBm (SIG1-SIG3 often bright), -76~ -85dBm (SIG1-SIG2 often bright), signal intensity below-86dBm (SIG1 often bright)
LAN1	Gigabit network port status indicator: flashing during cable data transmission, going off when the cable is disconnected.
	Wireless lamp: flashing when the bridge is running normally
	Power indicator: power is on and off when power is off.